Thursday, July 21, 2011

Sakura the Sake Rocket pt.2

Loving the electric Leg

First cracked open and while it's all in good shape it is definitely cruddy. Not shown was the fun involved in getting the planetary gear drive out of the end cap. That process involved grinding up a pair of old needle-nose pliers, some bleeding and fairly spicy language. I took the opportunity to add fresh grease and the whole assembly now spins very smoothly, noticeably better than before.
A dirty dirty girl (the very best kind) but even the commutator was in great shape along with the brushes, bearings and bushings. Good deal.


And what it looks like presently, with a little wrinkle black paint and nothing more than some brass tube slipped over the screws. It's amazing how much that fancied up a rather mundane piece. I've decided to replace the long screws with stainless hex right along with the engine screws and will likely turn some nicer decorative brass tubes to replace the straight stuff.




Building a seat V.1.0







A simple pattern drawn on some corrugated plastic sign material I had laying around. I cut it out and worked the two pieces such that it sat right as I wanted.








 


I'm a big fan of reusing materials when I can. It helps keep good stuff out of the landfills and saves some cabbage too. I wanted a seatbase that wasn't entirely flat and was preparing myself to form it from thicker material and shape it with a sureform. Then my 15 year old office chair died. It was fate I'm sure that forced the long forming crack in the base to finally let go at the opportune moment. Booyah, seat base.....

Cut, hack, chop, mangle, bleed, swear.....etc......


You can see here where the base wood has been pocketed to fit snugly onto the frame. A couple turned studs up front and a patch of industrial hook & loop (not the worthless shit that's on Grandad's bingo shoes) at the rear between the cutouts..

Here's the rough cut and formed pieces laid on the frame to give me an idea where I wanted to start forming and shaping.
















At this point I got it shaped and decided not to fiberglass the base, after standing on it braced between a couple cinder blocks. Held my sizable self up just fine without a single protest. Instead I tried a product called KwikPoly with a little black dye added, it's extremely thin and soaks right into the wood making it pretty much invulnerable to fuel, water, oil or smashed bankers.
























Pretty simple stuff here, trace, cut (bleed more)...etc...
A little forming by way of the palm sander
I added a cover of 3/8" open cell foam to smooth out the padding under the upholstery.

Oh yeah, here's the underside after I coated the whole thing in the kwikpoly. This has a really interesting...almost plastic feel now.








































































Which leaves us here.......the black 'race foam' that I used turns out to be not so nice on anything other than a...say it with me.....race seat. This bike isn't going racing and in the end after sitting on it briefly I've decided that it's just not comfortable. I run the exact same stuff on cafe seats and seat cowls on sport bikes but this just isn't working out. As well, while I dig the 'Brat Style' seats a lot I think this one needs something a bit more ass friendly. Plus, the mental image I had didn't turn out in practice. I'd intended to have the  padding and upholstery sweep out along side the rear fender with a small butt pad added to the fender itself. I've since decided that is stupid and whomever thought of it should be hit with a stick......if I could just figure out who that guy was. Don't tell me...I'll think of it eventually.
Moral of the seat building story....just because you put a shitload of time and effort into something doesn't mean it's going to end up at all worth while. I think I'll go have a beer and pout. And figure out a new seat.......

Perhaps a day of randomness is good......

So I'm stuck in a holding pattern here whilst awaiting some parts so I had a few minutes to goof around and found this. No, it's not a fake, yes it's in Japan.
When we lived in Tokyo we got so used to this kinda stuff we rarely laughed but we sure do now.......

Yeah I dig it......more.

So if you saw the post below, I'm sure you noticed the interesting bike. Neat to be sure but Willow here just really works for me. 

Still in the fab/mock up stages and I'm posting this as a simple teaser. For those of you not in the know, this was build in a gravel floored 'garage' without the aid of any really expensive equipment. If this doesn't motivate us to get off out collective asses and MAKE SOMETHING...then we suck and our only remaining purpose is to heap praise on the kats that do. 


More to come, oh yes....there will be more.


Tuesday, July 19, 2011

Yeah.... I dig it..

 I can't remember where I ran across this one, but I really like it. It's not often that someone approaches custom motorcycle building with a totally fresh eye but this guy did. Unfortunately I don't know anything about it other than it was build in France. If anyone has details on this unique bike drop me a line and I'll update this post and my own files. It appears to be a leaner too which is neat, and in my opinion the only way to do a three wheel bike and maintain any kind of soul.


You know you'd HAVE to.....I would.

Friday, July 15, 2011

Sakura the Sake Rocket

Sakura is Japanese for Cherry Blossom, it will be a running element in this bike's final form. 

Not so blossomy in this form, as I acquired her. This was after 4 hours of diligent scrubbing and cursing. This is one of those bikes that some shmuck bought, road for a couple seasons and parked next to his garage to lemming off after his next societal fix. 

My buddy Big Myk bought it, not knowing anything about motorcycles and being overwhelmed, she sat neglected again for a further 3-4 years before coming to me after his cat tried to mate with both my new couches. 
note: The cafe seat is just propped on it in this pic, as my initial plan was to build her into a canyon machine.

27xx miles, empty rear shocks and three dead mice shot out of the exhaust when I got her fired up....cool! Typical abused wiring...why do people think it's ok to do stupid shit to a bike that one would NEVER do to a car? Left turn signal......headlight flashed, sorta. Step on the rear brake pedal and the neutral light glowed faintly. Fuck me.....


Stick with my while I cram a diamond up this goats ass....























Here's the frame after a little chopping and hacking. Nothing outrageous here just a good solid platform.
I'm still working on taking pics as I go so there's nothing showing the grinding and detabbing process. It was done rudely and with much malice using a hacksaw, 5" side grinder, some files and various flap wheels. I had grit in my hair and teeth when I got home. It was fun!




Here it is all smoothed and purdy with a nice new coat of black epoxy. Also shown is the CB360 swingarm which is a couple inches longer than the OEM piece. As it sits, the strut is at 11" and the bar in the swingarm is at centerline for the 19" wheel and tire I'll be running back there. The front will be lowered to suit but this is the static ride height she'll have once on two wheels again. I'll be setting up the rear for approximately one inch of  droop sag leaving a remaining 2" of compression. Hey at least it's not a hardtail, there will be a little suspension.....maybe.....

Much more to come....later.

Swapmeet Louie's XS650 'The G'asshole'

My buddy Swaps is a topshelf kat, always has his mits in some rig or another and this is one of his latest. After having the Discovery Channel OCC style bikes(?) crammed down our throats it's welcome to see something clean and functional but loaded with personality. On top of being a talented bike builder he's also a giant personality and has agreed to write some for me here so look forward to that. In the mean time, take a gander at what you should be riding if you're not canyon carving.

At the Idaho State Pen 




















































Sadly the lovely original paint-job didn't survive a leaky tank......






Motorcycle building for G'assholes



















Thursday, July 14, 2011

Caption contest time kiddies......

Ok here's the deal, you can submit as many captions as you want, the ones that makes me smile or laugh the most....win.
Simple.
Winners get a sticker and a cookie. Well, maybe a cookie but definitely sticker and a 10% discount 'coupon' for some bauble or another that I can make.

Send your captions to me here at homagemotoworks-at-gmail-dot-com and put 'Caption' in the subject line. I'll choose the best on Friday July 29th and they'll be posted here for all to enjoy. Bring it on!




Oh yeah and just because I love you all like family:
(not part of the caption contest)

Beating up on the noobies.....

What is it about these here intertoobs that make otherwise mellow folks into raging douche-nozzles? How many of us have been nuked by some self proclaimed expert on one forum of another for having the temerity to be 'The New Guy'?
(cue scary theme music)

The simple solution; just don't play. Move on and find somewhere else to get your questions answered. Yes, there will always be a fat, pimply, basement dwelling, lube palmed hero poster who will try and start shit. They're everywhere because it's cool to be an anonymous dickhead on the 'net. However, those 'guys' tend to get themselves shut down and/or shunted off in short order. If however you find yourself in the midst of a feeding frenzy, just calmly walk away. There are other places so don't sweat the petty shit. And it's all petty...



Hold me, squeeze me, never let me go......


















Fork clamps for adding steering stabilizers.

Get on yer pony and RIDE!!!!
















From the always interesting Ride the Machine

Tuesday, July 12, 2011

Makin' shit #1

Ok, looks like I can upload photos directly so for the time being Photobucket, Picassa et al can pound sand.

Making billet aluminum triple clamps
Get yourself some material, in this case some nice 7/8" 6061-t6 aluminum plate. The blue is dykem markout dye.


 
Make some holes.
There are a few missing steps here because I was too busy making a mess to take pictures. These are for a CB450 with the steering deraked to 25*, to keep the trail within tolerable range the offset was decreases approximately 5mm, though I'm pulling that out of my back pocket because again...I was too busy making them to pay attention once the initial calculations were done. Both plates are bolted together and all bores are started with an end mill plunge to allow for boring head clearance.




Clean out yer hole!
At this point the bores are cut to spec with one of two boring bars. These are going to house some custom built 37mm Showa cartridge forks and a Honda spec heavy wall stem. Note, the bottom clamp has some extra cutting to accommodate the larger diameter of the stem at the bottom.
(bottom stem rebore)




Here I've roughed in one cut on a ragged old bandsaw, then back to the mill to cut it to spec and a final pass with a flycutter.

 After the boundary areas are cut to shape I bore, counterbore then tap for the clamp screws.


 Using a slitting saw in the mill allows the clamp relief to be cut neatly so that when the bolt is brought to torque the fork leg will be clamped firmly in place.
 

Knocking off the corner. I'd intended to use the rotary table to make nice round ends but found that it needed some love so these are a little geometric.....


Adding some lightness (plus it looks neat too!) Not shown are a series of 5/8"d pegs tapped into the table slots at predetermined locations that allowed me to clamp the work piece down, then reposition for additional cuts and have them come out right.


And finally the finished pieces, and a lightly modified stock piece for visual reference. Note that these pieces clamp the stem in place top and bottom, not shown is the 1/8" lip and pin at the bottom of the stem to help index it to the bottom clamp. I'll try to get better at taking pictures as I go along......













Just for my Brutha Fruma Nutha Mutha Troy, here's a little Seasick Steve: Doghouse Boogie

Monday, July 11, 2011

Big Fat Music Monday

I have always been a little schizophrenic when it comes to music. It got worse when we moved to Tokyo; as a 15 year-old I was pretty lost there until I found a record store at the outdoor market near our home, that rented American music albums (vinyl) and sold highend cassette tapes and equipment for dubbing your own cassettes. For 300yen....about $1.30 at the time you got the platter of your choice, a metal cassette and could enjoy the vinyl for a week to boot! If I remember correctly there was some 5000 albums to select from. ODB just reminded me that they did have classical, jazz and early electronica as well as the 'shit you listen to'.
When we left the land of the rising sun I had some 600 or so tapes, all over the board as far as genre is concerned. I could have had more but around the 2 month mark I discovered 'Japanese Highschool Girls'......but that's another story all together.

I have also had the good luck to be introduced to all sorts of new music from friends and acquaintances, so in honor of Big Fat Music Monday (it's a holiday somewhere....):

The amazingly talented Emily Wells (best use of kids toys)



The incomparable Camille O'Sullivan (Best Nick Cave cover EVER!!!! Thanks for this one Troy!)

Tom Waites.....
"Tom Waits' songs are like a Tennessee Williams play; the sound of people living together in separate silent hells." ~ Unknown online commenter


John Prine ......because he's John Prine

Junkyard...fat, sticky 80's rock sound! 
In the 80's I had the same hair as the lead singer and dressed like BonJovi. It worked to my advantage in Japan.....I was HUGE in Japan.

The Stones.

Towns Van Zandt

Thanks to the Barbarian Horde, thanks for following I hope you're diggin' it.
More to come.......



Thursday, July 7, 2011

Smart Branding

From the ever entertaining Daily Pinup:

YAY!! My first hate mail.....

I found this gem in my spam folder just now and had to put it up here; in the spirit of honest repartee and all. And to make fun of it, because the sender is a douchebag fucktard who should have his testicles removed to assure that he doesn't breed. Seriously, do we need more shitheads? I think not, there are enough already. Just look to any state capital.......
On to the fun:

Your a fucking racist motherf*cker! You white ass peace of shit if my boys knew were to find you, you wood learn a leson with an axe handle! If you hate MEXICANS so much go somewere else! Fuck you! 
-Juan Valdez@anchorbaby.com

(Yeah I changed the email....I'm really just a big softy)

Where to to start? Ok, first off you drooling moron, get a damned education. Though I was able to get the jist, not only can you not spell but your only option for punctuation is an exclamation point.....and you're too fucking stupid to use spell correct on the community center pc you were greasing up. Idiot.

Oh and fuck you! Go somewhere else?.....hey Jose, dunno if you noticed but you're in MY COUNTRY. Just because I want to read signage in English here in AMERICA you fucking entitled welfare sponge, doesn't mean that I have anything against Mexicans. In fact, I can generally find something to like about most people. I love a good burrito. What bothers me are losers just like you, living off the dole and squirting out anchor babies.
But tell your Mom I said thanks for cleaning my bathroom, she did a great job.

Fucktard (I really like that word)

For the record: I don't really have a problem with people of different races. I know some gay folk who are just great and I'm Universalist enough to not give two shits what your religion is so long as you don't force it on me. I just hate assholes.

In honor of Mr.Fucktard P. Welfarecheck above I give you the words of my favorite American:
We should insist that if the immigrant who comes here does in good faith become an American and assimilates himself to us he shall be treated on an exact equality with every one else, for it is an outrage to discriminate against any such man because of creed or birth-place or origin.

But this is predicated upon the man's becoming in very fact an American and nothing but an American. If he tries to keep segregated with men of his own origin and separated from the rest of America, then he isn't doing his part as an American. There can be no divided allegiance here. . . We have room for but one language here, and that is the English language, for we intend to see that the crucible turns our people out as Americans, of American nationality, and not as dwellers in a polyglot boarding-house; and we have room for but one soul loyalty, and that is loyalty to the American people.
-Theodore  Roosevelt  1919
(letter to the president of the American Defense Society)
 

More fourth of July shit...this is funnier

Her cooking is drunken and funny, mine is just drunken, well....and maybe a little angry. Watch her......really.

For more of this shit, go here: http://www.youtube.com/user/MyHarto
or
www.hartoandco.com

More to come...

Tuesday, July 5, 2011

For now I'll call these "Mike's Ramblings" though we'll work on a better name..

 Not long ago our fearless leader here at Homage, or as some know him, “El Presidente Mandingo the Glorious” asked me if I would be interested in writing some essays for his Big MF’n Blog. Well, not so much write essays, as half drunkenly scribbled ramblings that may be considered interesting to the great heaving pile of humanity, and send them his way. Sure I said your Excellence, sure…
    Well, after several weeks of celebrating the good old USofA’s birthday, sadly watching two close friends suffer the losses of their fathers (both great men, who will be missed), and your usual soul lifting/crushing day to day life experiences, I think I may have finally found reason to bravely spew forth upon you the truth, or something much uglier. We shall see.
    Let me really start by saying thank you to our man Lee here. Not only is a hell of a machinist and fabricator, but also the kind of friend any man would be lucky to call “Oh High and Righteous Leader” (that’s what you told me to write, right?). In the few years that I have known this man, I have seen him create some things from raw metal that would make the Tin-Man blow a load in his alloy shorts. Parts that now reside on bikes across this country and beyond, proudly displayed by their owners knowing that the bit in question is of the highest quality. And every clip on mount, headlight ear, or foot-peg bracket made by hand in the shop of a true craftsman. A true craftsman, who after toiling at his various machines for hours every day, still had the decency to write to me and commend me on my fledging (or is that flailing) attempts at writing about the world we live in. Hell of a guy Lee is, and if you disagree… Well, he’s a hell of a big guy too, so take that up with him.
    

Ok… Now that the ass kissing is out of the way.

    I noticed something very interesting recently. A fellow (unknown to me personally) rider recently lost his life in a motorcycle accident and afterwards, the media and several people I know took the circumstances surrounding his death to ridicule and make fun of the deceased. Really kids? That’s our society now? Goddamn shame. The man made a decision, and it cost him his life. He was a grown up, and I am sure understood the possible outcome of his choice. And now he is dead. His family will mourn, his friends will suffer. But, apparently that isn’t enough for the people of the world. We have to turn it into a debate about what our rights are. An argument about who gets to tell who what to do in their lives. How about we save the political pandering till the guy is six deep at least, huh folks? And if you don’t know the story I’m talking about, watch the news every so often ya friggin’ weirdo!
    On second thought, don’t bother. Nothing much there but sad stories and made up bull shit.


    Another faint odor of a thought that’s been floating through my skull as of late has to do with the overall custom bike industry. I am in NO WAY a part of that or any other industry, but I do try to follow it somewhat closely. Maybe it’s because of my shop ownership pipe dreams, or the fact that I am sexually aroused by vintage motorcycles. Wait, I meant intellectually aroused… Ya, that’s it.
    Anyhow, I as an outsider couldn’t be happier about the seeming lack of interest in the “INDUSTRY” by the general public as of late. Sure, plenty of shops are going under, and one time bike “builders” are heading back to their accounting firms to beg for their “real” jobs back, but that’s all good if you ask me. And, I know you were about to. Now what we’re seeing are the real innovators and creators at work again. The guys who founded the principles of bikes as functional art are again free to make some two wheeled, fire breathing magic without fucking camera crews up their asses. They can build without every NASCAR loving tool and his unruly brats trying to get his autograph on an eight dollar Wal-Mart “CHOPPERS FOR LIFE” T-shirt. There are great things ahead for those of us that are carnall… I mean spiritually attracted to these machines, and this life. I mean those of us that really spend our time learning the history of motorcycles. Those of us that get lost on our garages for hours, just trying to figure out a new way to mount a killer taillight on a chopped CB750, or some off the wall brakes for that custom Panhead. Keep it up folks. And keep telling the plastic gangsters that we aren’t interested in what they’re selling. Eventually your fishing hat wearing neighbor will go back to thinking you’re a scumbag, and looking away when you roll into the driveway instead of running over to ask if you saw that new neat-o OCC bike on TV last night. 

And really, can we ask for much more in life? 
I think not.

    Well shoot. I think that’s all I can really complain about for now. Hopefully you all out there in cyber land dig it. If not, oh well, maybe next time. Keep it real folks.

-Mike D

Mike, it's actually "Oh Bright and Luminous Leader", not that I make it a habit to correct those who dole out the love, as it were, but I am shiny.

I am...

Shiny.

A shiny, shiny man......

A 5th of July rant.......

My town kinda blows....

I've had the opportunity to live all over the place; other countries, different states here in the US etc., but for whatever reason I always end up back here. Over the years this sleepy little piece of Hometown America has slowly, inexorably dwindled. That's the best way I can think of to put it. When we moved here (the first time) this was a pretty little Norman Rockwell picture of small town life. Main street really was the main street, high-school football was a big deal and on any given Saturday evening, one could wander into the drug store, sit on a stool in front of a 1920's Formica bar and order a milkshake.
Now mainstreet is threadbare, more shops are closed than open, mainly because there's a Wallfart mega store opened up just down the road. As well, over 50% of the businesses here have signage in Spanish and you don't speak the language, you're a jerk and you're not gonna get service. It's no longer safe for an attractive woman to walk around the block after dark. The cops here would rather write a parking ticket or beat a retard to death than actually stop crime. Oh they'll get all fired up if it's a big one that might get media attention but that's about it.

But even worse than that? No fucking fireworks on the 4th.
Lame.

Every immigrant who comes here should be required within five years to learn English or leave the country.
~Theodore Roosevelt